PIC 50 and PIC 75

The PIC 50/75 High Speed Fold Up Door is the answer where large openings are subject to windy conditions.

Vertical movement is actuated by lift belts, which progressively pack the sections at the top of the door.

The PIC 75 is a modified PIC 50 with a forward facing motor where side room at high level is limited.

PIC 50 available up to 7000mm wide x 6000mm high
PIC 75 available up to 6000mm wide x 5000mm high
(See our Instant Pass for larger openings)

Opening speed of up to 1m/second

The curtain is made from trevira type twin moulded polyester fabric, self extinguishing Class 2, with pockets for strengthening tubes. Available in a range of colours.

The PIC range of Fold Up Doors is in fact the original type of fast action door which has been sold for many years in preference to roll up doors. They still remain the most popular model for external openings.

Standard features of the PIC 50 and PIC75:

• Self-supporting structure in galvanised steel
• Full width canopy and motor cover
• Ultra silent sliding mechanism, featuring lateral guides with twin rubber seals
• One row of vision panels
• Wind bars made from tubular steel which guarantee perfect closing even in the event of wind speeds up to 50 km/h (Calculated on MAXIMUM opening dimensions). Optional wind resistance up to 120 km/h available at extra cost
• Safety photocell to stop door and return to open position should an obstacle be detected
• Standard control panel mounted push buttons
• Emergency manual override

Options available: (at extra cost)

• Stainless steel frame (AISI 304)
• Powder coated frame to standard RAL colour
• Logo on curtain (max. 2 colours)
• Additional rows of vision panels
• Additional safety photocell
• Safety bottom edge
• Operation by pushbuttons, induction loop, radio control, radar (motion sensor), pull cord, etc.
• Interlocking doors to other doors
• Partial opening function

Technical Information for PIC 50 and PIC75 in PDF format You will need Adobe Reader to view this file - click here to download Adobe Reader

PAL 150/200

The PAL 150/200 High Speed Roll Up door is recommended for transit areas on large industrial and commercial sites.

PAL 100 N available up to 6000mm wide x 5500mm high

Opening speed of up to 0.8m/second

The curtain is made from trevira type twin moulded polyester fabric, self extinguishing Class 2, with pockets for strengthening tubes. Available in a range of colours.

Standard features of the PAL 100 N:

• Self-supporting structure in galvanised steel
• Full width canopy and motor cover
• Ultra silent sliding mechanism, featuring lateral guides with twin rubber seals
• One row of vision panels
• Wind bars made from tubular steel which guarantee perfect closing even in the event of wind speeds up to 60 km/h (Calculated on MAXIMUM opening dimensions)
• Safety photocell to stop door and return to open position should an obstacle be detected.
• Standard control panel mounted push buttons
• Emergency manual override

PAL 150/200 showing insulated curtain

Options available: (at extra cost)

• Stainless steel frame (AISI 304)
• Powder coated frame to standard RAL colour
• Logo on curtain (max. 2 colours)
• Wind resistance up to 80 km/h (max. opening size 4500mm wide x 5000mm high)
• Wind resistance up to 100 km/h (max. opening size 3500mm wide x 5000mm high)
• Additional rows of vision panels
• Additional safety photocell
• Safety bottom edge
• Operation by pushbuttons, induction loop, radio control, radar (motion sensor), pull cord, etc.
• Interlocking doors to other doors
• Partial opening function

Standard features of the PAL 200:

The PAL 200 includes all the features of the PAL 100 N but also includes a counterbalance spring in one of the uprights. In the event of power failure this releases the motor brake and causes the door to rise automatically or by means of a push button at user height.

The door can also be integrated into a fire alarm system to open on a fire alarm signal. (No connections into fire alarm included by Syston Doors)

PAL 150 Pneumatic

PAL 150 is also available with a pneumatic motor for use in explosive atmospheres.

The basic door construction is as the standard PAL 100 but with an operating speed of 0.5 m/sec.

The operator is a reversible pneumatic motor with 1.1 kW at 3000 rpm, pressure supply of 7 bar.

Technical Information for PAL 150/200 N in PDF format You will need Adobe Reader to view this file - click here to download Adobe Reader

PAT 100

The PAT 100 is recommended for use as a reliable general-purpose internal door for traffic flow areas on busy sites.

The PAT 100 is robust, and comes with interchangeable sections, which in the event of curtain damage can be easily replaced.

It is available in a range with basic construction being the same.

The curtain is made from trevira type twin moulded polyester fabric, self-extinguishing Class 2. Door panels are interchangeable for rapid, easy replacement in the event of damage. Anodised aluminium joints connect the panels. Available in a range of colours.

Opening speed of up to 0.8m/second (PAT 100 i up to 1m/second)

Standard features of the PAT 100:

• Self-supporting structure in galvanised steel
• Full width canopy and motor cover
• One 750mm PVC vision panel
• Wind bars made from anodised aluminium which guarantee perfect closing even in the event of wind speeds up to 60 km/h (Calculated on MAXIMUM opening dimensions). (Except on PAT 100 i with anti-crash lower section which is designed for internal use only)
• Safety photocell to stop door and return to open position should an obstacle be detected.
• Standard control panel mounted push buttons.
• Emergency manual override

Options available: (at extra cost)

• Stainless steel frame (AISI 304)
• Powder coated frame to standard RAL colour
• Logo on curtain (max. 2 colours)
• Additional vision panels
• Fully transparent curtain up to 3000mm wide x 3000mm high
• Additional safety photocell
• Safety bottom edge (not on Anti-Crash or Self-Repairing models)
• Operation by pushbuttons, induction loop, radio control, radar (motion sensor), pull cord, etc.
• Interlocking doors to other doors.
• Partial opening function

PAT 100 N

The standard door for use in most areas.

PAT 100 INOX (AISI 304 Stainless Steel frame)

Designed to ensure the highest hygiene standards. For applications in the food, chemical and pharmaceutical industries.

PAT 100 i

Designed for internal use only with a maximum width of 3000mm. This model is equipped with an anti-crash lower section. In the case of accidental damage the lower section flows out of the uprights and can be easily inserted again by the user.

PAT 100 Anti-Crash

Similar to the PAT 100 i, this model is suitable for both internal and external use up to 4000mm wide x 5000mm high.

PAT 100 AR Self Repairing Door

This model includes a self-repairing feature. In the event of accidental damage the curtain will automatically reinsert itself in the guides once fully opened.

It is suitable for both internal and external use up to 4000mm wide x 5000mm high

PAT 100 Pneumatic

The basic door construction is as the standard PAT 100 N but with an operating speed of 0.5 m/sec.

The operator is a reversible pneumatic motor with 1.1 kW at 3000 rpm, pressure supply of 7 bar.

Technical Information for PAT 100 in PDF format You will need Adobe Reader to view this file - click here to download Adobe Reader

STAR 250 showing 2 vision strip option

The STAR range boasts removable uprights, canopy and roller for inspection, replacement and general cleaning.

The STAR 250 Roll Up door with its compact structure, high-speed performance and wide range of options, is the ideal door for rapid transport areas. Its design also makes it particularly suited to installation ‘within’ structural openings.

Opening speed of up 1m/second

Standard features of the STAR 250 range:

• Self-supporting structure in galvanised steel
• Full width canopy and motor cover
• One 750mm PVC vision panel
• Wind bars made from anodised aluminium which guarantee perfect closing even in the event of wind speeds up to 60 km/h (Calculated on MAXIMUM opening dimensions)
• Safety photocell to stop door and return to open position should an obstacle be detected.
• Standard control panel mounted push buttons
• Emergency manual override

Options available: (at extra cost)

• Stainless steel frame (AISI 304)
• Powder coated frame to standard RAL colour
• Logo on curtain (max. 2 colours)
• Additional vision panels
• Fully transparent curtain up to 3000mm wide x 3000mm high
• Additional safety photocell
• Safety bottom edge (not on Anti-Crash model)
• Operation by pushbuttons, induction loop, radio control, radar (motion sensor), pull cord, etc.
• Interlocking doors to other doors
• Partial opening function

STAR 250 Plus

STAR 250 Plus

Manufactured to meet FDA regulations for food storage/processing applications. This door offers the same options as the Star 250 N model, except that it always has a stainless steel 304 structure and completely transparent PVC curtain. It also includes the control box mounted within the structure.

Available up to 3000mm wide x 3000mm high.

STAR 250 i

Designed for internal use only with a maximum width of 3000mm this model is equipped with an anti crash break through lower section. In case of accidental damage the lower section flows outside the uprights and can be easily inserted again by the user.

STAR 250 Anti-Crash

Designed for both external and internal openings this model is equipped with an anti crash break through lower section as the STAR 250 i but is available up to 4000mm wide x 5000mm high.

Technical Information for STAR 250 N in PDF format You will need Adobe Reader to view this file - click here to download Adobe Reader

STAR 250 Arctic

STAR 250 Arctic

The STAR 250 Arctic has been designed to suit an installation inside a negative temperature environment up to –30 deg C.

The flexible transparent PVC curtain is a special Super Polar material that can resist up to –60 deg C.

This allows the curtain to remain flexible up to –30 deg C during operation. There is no need for upright and ground heating systems to prevent ice build up.

The only heating is on the motor to keep the temperature of the mechanical brake stable.

The door must operate every 10 minutes to prevent excessive ice build up.

The uprights and head casing are made from Stainless Steel AISI 304 and are designed for face fitting or fitting within the opening. A movable front cover provides easy access for maintenance. A full width head casing and motor cover is supplied as standard.

STAR 250 Arctic is available for internal openings up to 3000mm wide x 4000mm high.

Opening speed is 1.0m/second.

Safety is provided by one pair of photocells, which will stop the door and return it to the open position should the beam be broken.

The curtain is made from fully transparent Super Polar PVC with interchangeable sections, with an aluminium bottom bar.

Standard features of the STAR 250 Arctic:

• Self-supporting structure in Stainless Steel AISI 304
• Full width hood and motor cover in Stainless Steel AISI 304
• Easy access for maintenance
• Fully transparent curtain
• Standard control panel mounted push buttons (Control panel must be mounted in a positive temperature area)
• Manual operation in the event of power failure

Options available: (at extra cost)

• Operation by radio control, induction loop, pull cord, etc.

STAR 250 Arctic Brochure (PDF - 153 KB)

REKORD 400 Self Repairing Door

Designed for internal use the Rekord 400 is a reliable self-repairing high-speed door designed for use in the commercial, food and chemical industries, up to 3000mm wide x 3000mm high.

Opening speed up to 1 m/second.

Standard features of the Rekord 400:

• Self-supporting structure in galvanised steel
• Full width canopy and motor cover
• Ultra silent sliding mechanism, featuring lateral guides with twin rubber seals
• One vision panel
• Strengthening bars within the curtain
• Self-repairing system
• Safety photocell to stop door and return to open position should an obstacle be detected
• Standard control panel mounted push buttons
• Emergency manual override

Options available: (at extra cost)

• Stainless steel frame (AISI 304)
• Powder coated frame to standard RAL colour
• Logo on curtain (max. 2 colours)
• Additional safety photocell
• Operation by pushbuttons, induction loop, radio control, radar (motion sensor), pull cord, etc.
• Interlocking doors to other doors
• Partial opening function

To accommodate the self-repairing system the door is fitted partially within the opening. See technical details.

opening following collision		closing following automatic re-feed

Technical Information for REKORD 400 in PDF format You will need Adobe Reader to view this file - click here to download Adobe Reader

Agropharma 900

The Agropharma 900 is a new concept for the high speed door market and has been designed for the food and pharmaceutical industries.

The common configuration of steel uprights and a flexible curtain with a safety photocell has been re-interpreted with new solutions for these industries.

Agropharma 900 includes a movable seal within the top casing and provides a good seal between two environments. Air pressure value is approximately 240 Pascal with the door in operation with air leakage of approximately 0.0015 sq. metres based on a net opening of 2000mm x 3000mm.

The uprights are made from polyethylene and the head box is made from stainless steel AISI 304 finished in a white non toxic paint finish.

Agropharma 900 is available for internal openings up to 3000mm wide x 3000mm high.

Opening speed is 1.0m/second.

Safety is provided by a safety detector mounted on the top casing which detects an obstruction and causes the door to stop and return to the open position.

Safety photocells and a safety edge are not required which greatly helps when cleaning down the door.

The curtain is made from flexible polyester with one row of vision panels as standard. Horizontal reinforcement bars within the curtain help to keep the curtain taught. The curtain is available in a range of colours.

Standard features of the Agropharma 900:

• Self-supporting structure in polyethylene
• Full width hood and water tight motor cover in Stainless Steel AISI 304 finished in a white non toxic paint finish
• Low air leakage
• Easy clean facility due to polyethylene guides which can be washed down even with aggressive cleaning materials
• Smooth design with no photocells or safety edge
• Safety sensor mounted on the top casing to one side of door
• One row of vision panels
• Reinforcement bars within the curtain
• Standard control panel mounted push buttons
• Manual operation in the event of power failure

Options available: (at extra cost)

• Safety sensor mounted on other side of door
• Operation by additional pushbuttons, induction loop, radio control, radar (motion sensor), pull cord, etc.
• Logo on curtain (max. 2 colours)
• Interlocking door to other doors

Agropharma 900 Brochure (PDF - 117 KB)

The RAL number is only indicative because the PVC will look different to painted metal

Motor and Control Options

The motor is a 3 phase unit with 24v controls and has been designed for intensive use and is linked to the door through an elastic coupling thus reducing vibration thereby increasing the motor life.

Standard protection is IP55.

Manual override is actioned through the use of a hand crank handle.

The door can be operated by photocell, induction loop detector, radar, radio control, push button station or by pull cord.

Electrical interlocking of two or more doors can also be provided.

By their design and versatility, high-speed doors can be justified financially as well as practically.

From temperature control to preventing dust entering machinery there are many applications where benefits will be felt immediately.