|
Insulated Folding & Straight Sliding Doors
Where our traditional sectional overhead door or our 'Compact'
door is not suited we can supply our 'Phoenix' range of insulated folding
and straight sliding doors.
Using a flat, single piece panel with an internal frame
that combines inner strength with outer aesthetic appeal.
The panel has a U value of 0.35W/m²/ºC which combines with
minimum cold bridging to reduce heat loss, whilst acoustic qualities
greatly reduce noise pollution.
Finished sheets are bonded in place with no exposed fixings
and internal voids filled with CFC-free foam to eliminate condensation
and corrosion.
 'Swift'
side-hung bifolding door
The 'Swift' is ideal for use in emergency service appliance
bays, sports halls, theatres, museums, vehicle maintenance bays and showrooms, & goods
entrance bays.
The 'Swift' includes:
 Innovative
flat panel, single piece insulated construction
Simplicity of
design and operation with self lubricating parts
Co-ordinated
aluminium hardware
Minimal maintenance
even under extreme working conditions
Availability
in a range of configurations up to 5700mm wide and 6000mm high within a
maximum 24m² door area
Side hung with
no bottom channel
All versions
fold clear of the opening, requiring minimal side and headroom
Full weather
seals for low heat loss and incorporate full height, finger-nip protection
between leaves for operator safety
Option for door
to be power operated (opening in under 5 seconds) using a quiet, quick
action electro-hydraulic mechanism with a choice of safety and control
options
No requirement
for load bearing lintel
 'Osprey'
sliding folding door
The Osprey is suitable for aircraft hangers, spray booths,
multi vehicle entrance bays, large goods/vehicle bays and workshops
The 'Osprey' includes:
Innovative
flat panel, single piece insulated construction
Soffit or sidewall
mounting
Galvanized bottom
guide track with corrosion proof guides
Co-ordinated
aluminium hardware
High quality
components and sealed for life bearings ensuring extreme durability and
ease of maintenance
Availability
in a range of configurations to accommodate openings of unlimited width
and up to 6000mm in height
Multi leaf construction
allowing the door to be partially open when full aperture access is not
required - reducing opening time, effort and heat loss
Full weather
seals for low heat loss and incorporation of full height, finger-nip protection
between leaves for operator safety
Option of power
operation on doors up to 18000mm wide with a choice of safety and control
options
 'Kingfisher'
straight sliding door
The Kingfisher is suitable for aircraft hangers, spray
booths, multi vehicle entrance bays, large goods/vehicle bays and workshops
The 'Kingfisher' includes:
Innovative
flat panel, single piece insulated construction
Soffit or sidewall
mounting
Co-ordinated
aluminium hardware
Top hung or
bottom rolling (to suit non-load bearing lintels)
Availability
in a range of configurations to accommodate openings of unlimited width
and up to 6000mm in height
Multi leaf construction
allowing the door to be partially open when full aperture access is not
required - reducing opening time, effort and heat loss
Individual leaves
up to a maximum of 4500mm wide - with permutations of leaves running on
single or multiple tracks
Insulated and
fully weathersealed to minimise heat loss
Low rolling
resistance for ease of use
Option of power
operation for both single and multi-leaf doors with a choice of safety
and control options ensuring quick and convenient opening and closing
All three doors can incorporate the following options:
Vision
Panels
Louvres
Plastisol,
PVf2 or Powder Coated finishes
Robust personnel
doors fitted within the panel
Various locking
options for added security
|
