Higher Security Systems - Collapsible Grilles & Rolling Shutters

To meet the ever increasing levels of security demanded by insurers we can offer a collapsible window/doorway grille (Seceuroguard 1001) and a rolling shutter (Seceuroshield 3801) that have both been tested to the rigorous LPS (Loss Prevention Standard) 1175 created by the LPCB (Loss Prevention Certification Board).

The standard LPS 1175: 'Specification for testing and classifying the burglary resistance of building components, strongpoints and security enclosures' covers several types of device and has six levels of security.

Our Secureflex Rolling Shutter also gives added security with its patented anti-cutting infill.

'SeceuroGuard' 1001

The SeceuroGuard Gate system combines a classic appearance with effective protection, ideal for home or workplace. The 'SeceuroGuard' 1001 has been tested and approved to LPS1175 security rating 1.

Sizing Spec Single Sash Double Sash Minimum Width 500mm 1000mm Minimum Height 1000mm 1000mm Maximum Width 3000mm 6000mm Maximum Height 3000mm 3000mm

Optional decorative S-profile lattice

The gate can be easily fitted to the face or reveal of a window or door aperture and can be specified in a single or double sash configuration. Where a completely clear opening is required the bottom track can be made to lift up and its sashes hinged to swing away from the opening at 90 or 180 degrees. The grille can be powder coated in a range of attractive colours.

'Seceuroshield' 3801

Unlike other certificated shutters, the 'Seceuroshield' 3801 (tested and approved to LPS 1175 security rating 1) uses a 38mm double-skinned extruded aluminium lath, which coils very tightly into a range of compact box sizes (165mm - 250mm) minimising their visual impact.

This is often a requirement for commercial and domestic installations where aesthetic considerations are paramount.

SeceuroShield 3801 Sizing Spec
Minimum Width	900mm
Minimum Height	900mm
Maximum Width	3000mm
Maximum Height	4000mm

They are supplied in white or brown as standard with a powder coated finish available at extra cost.

The 'Seceuroshield' 3801 can be fitted internally or externally in either the window reveal or face fitted to the opening.

The certificate allows 'Seceuroshield' 3801 to be manufactured to a smaller size (900mm x 900mm) than any other tested product and can be produced up to 3000mm in width.

Technical Information for Seceuroshield 3801 (graphic opens in new window)

Secureflex

These days criminals use all types of cutting equipment to gain entry to your premises.

Professional criminal gangs can enter and escape with the contents of the building within four minutes.

The pictures show a standard single skin rolling shutter which is penetrated within 15 – 20 seconds. This compares to the unique patented anti-cutting infill properties of Secureflex, which prevents unlawful entry.

Standard Roller Shutter		Secureflex

Secureflex dramatically increases the amount of time the burglar, using high speed cutting equipment, has to spend entering the building. Secureflex, due to its lightweight composite patented design, offers complete protection for your stock, increases your security and could lower your insurance premiums.

The door has been designed using the latest in direct drive motor technology and complies with current safety requirements. The motor gearbox incorporates a built in safety brake for complete peace of mind.

Standard curtain finish is galvanised to both sides.

Optional finishes include:

The guides are galvanised but can be powder coated.

Secureflex operates in the same way as our Thermaroll insulated rolling shutter, which means that a Thermaroll curtain can be updated with a Secureflex curtain if added security is required*.

If you want protection from cut and run attacks, Secureflex is the professional solution.

*Secureflex does not include an insulating foam core whereas Thermaroll does.

Technical Information for Secureflex (graphic opens in new window)

A colour leaflet is available for this product on request.